Process Hierarchy

If you are interested in this process, either by itself or as part of a longer processing sequence, please send us email at engineering@mems-exchange.org or call us at (703) 262-5368
on front
  Aluminum (1% silicon) plasma etch
on front
  1 Aluminum plasma etch
Materialaluminum
on front
  2 Post-aluminum plasma etch (passivation and strip)
Materialphotoresist (category)
Process characteristics:
Depth
Depth of material removed by etch process
Depth*
Depth of material removed by etch process, must be 0 .. 2 µm
0 .. 2 µm
Material aluminum/silicon [99:1]
Selectivity
Primary material removal rate divided by removal rates of secondary materials (i.e., factors by which primary material is removed faster than secondary materials)
 aluminum/silicon [99:1]: 1, photoresist (category): 1.5
Wafer size
Wafer size
Comments:
  • If Chamber D of P5000 not available, manual passivation/strip procedure must be performed.