on front Aluminum DC magnetron sputtering |
|
| Process characteristics: |
| Power Microwave power radiated into substrates being bonded |
|
|---|
| Thickness |
|
|---|
| Batch size |
12 |
|---|
| Deposition rate Rate at which material is added to a wafer |
132 .. 3300 Å/min |
|---|
| Material |
aluminum/copper [99.5:0.5] |
|---|
| Pressure Pressure of process chamber during processing |
5 mTorr |
|---|
| Sides processed |
either |
|---|
| Temperature |
27 °C |
|---|
| Wafer size |
|
|---|
| Equipment |
Varian XM8 Sputterer
|
| Equipment characteristics: |
| MOS clean |
no |
|---|
| Wafer geometry Types of wafers this equipment can accept |
1-flat, 2-flat, no-flat, notched |
|---|
| Wafer holder Device that holds the wafers during processing. |
stainless steel |
|---|
| Wafer materials List of wafer materials this tool can accept (not list of all materials, just the wafer itself). |
alumina, BK7, Borofloat (Schott), ceramic, copper, Corning 1737, Foturan (Schott), fused silica, gallium arsenide, gallium phosphide, germanium, glass (Hoya), glass-ceramic, indium phosphide, lithium niobate, other, Pyrex (Corning 7740), quartz (fused silica), quartz (single crystal), sapphire, silicon, silicon carbide, silicon germanium, silicon on insulator, silicon on sapphire, titanium |
|---|
| Wafer thickness List or range of wafer thicknesses the tool can accept |
300 .. 2000 µm |
|---|
